Tagged: vintage

The workshop is DONE!

This post has only been THREE YEARS in the making. But first can we talk about foot injuries and one-man construction crews? That combo really sucks… like drinking wine after brushing your teeth. It doesn’t make anyone happy. So it’s been unintentionally quiet here (and literally quiet at the firehouse) as Aaron’s foot heeled. He’s back in motion again and chomping at the bit to get projects back in flight for the living room/dining room redo.

Just before the foot injury claimed two months of his life, he finished the workshop and put it instantly to use to build a pantry for the new trailer… because he (ok… we…) can’t leave well enough alone. Now it’s clean and ready for its’ debut on the interwebs!

We already told you about dropping more power into the space, framing & painting, adding a window and lighting the place up, but there was more work to be done before this space was finished, including a bit of building and installing the dust collection system. (More on that last bit in the next post.)

First Aaron built a wall in the back of the workshop that he covered in pegboard to provide much needed hanging storage.

001_workshop_after

002workshop_after

Then he built a table for the miter saw.

003workshop_after 004workshop_after 005workshop_after

Finally he created an out-feed table for the table saw.

006workshop_after 007workshop_after 008workshop_after

Ok – are you ready for the grand tour? When you come down the stairs, now you see this:

009workshop_after

The slated plastic door helps keep dust contained in the workshop (and is really fun to walk through).

Once Aaron started laying out the workshop he realized how small it was relative to the amount of tools he wanted to put it in. So instead of going in the workshop, the lockers we’ve been hoarding are just to the left after you come down the stairs. They’re full of materials like painting supplies and extension cords. (If you’re not familiar with the layout we’re after, check out this post and it will make more sense.) Eventually this walkway will get more finishing touches.

010workshop_after

Once you stop into the space it looks like this!!

011workshop_after

The finished miter saw table has storage and a charging station below. Overhead a reel and hose make it easy to connect and use air-powered tools in the workshop without moving the air compressor.

012workshop_after

On the opposite wall, the router table is tucked to the left (and on wheels for easy relocation) and the table saw and out-feed table dominate the room. This was strategically placed under a floor drain that dips low enough for Aaron to smash his head into.

013workshop_after

The out-feed table also has storage below.

014workshop_after

Moving left to right: a workbench, air conditioner, the dust collector, the finished pegboard wall, disc/belt sander and jointer.

015workshop_after

Here’s the view from the back.

016workshop_after

It’s been a long time coming, but it I think it was worth the wait. This space is amazing! Aaron has already used it for a few projects, and it’s a revelation not to have sawdust in our living space or be required to scoot around pieces of wood that have been painted and are drying. But, really, what I love the most about the workshop is that everything has a home… that isn’t my (future) dining room floor. There are all these little moments that make my organization loving heart so, so happy.

017workshop_after 018workshop_after 019workshop_after 020workshop_after 021workshop_after 022workshop_after

And because I’m sucker for a really good before and after. Here’s a look at 3+ years ago vs today.

023workshop_after 024workshop_after

 

We bought another trailer

I’ll preface this post by saying that it’s been a weird couple of weeks. That title is not something I expected to write anytime soon, because we already own a sweet, vintage trailer. So let’s dive right in.

About two weeks ago, we took advantage of some really nice weather to do some work in the extra lot. Although we hired some Craigslist labor to do the first major cleanup, the lot was still littered with half of a tree, a pile of bricks and SOOO many sticks. We pulled out the chainsaw to take care of some of the larger pieces of wood and started a controlled brush fire (file that under things I never thought I’d say).

At some point in the course of the day, Aaron hurt his right foot. It wasn’t a “Bang! Ow!” situation, but more of a “We’ve been recouping on the couch and my foot is really starting to hurt” and the next morning “Seriously, my foot hurts.” And that’s been the status for a few weeks. We’ve gone from crutches to a walking boot, which I have helpfully named “Das Boot” because everyone needs a daily Beerfest reference – right?

All of this foot pain caused us to cancel our first camping trip of the year. So that Friday instead of enjoying nature, we were stuck at home and Aaron was making his usual Craigslist rounds. He stumbled on a 2010 R-pod camping trailer at a fantastic price.

002rpod

Before we go any further (because you obviously know that we bought this R-pod trailer) it’s helpful to have a little background about our current trailer. When we bought it, it was supposed to be a relatively quick, interior-only redo that would give us veritable hotel room on wheels. Then the firehouse happened and that project came to a screeching halt as we tackled all of the incredibly necessary projects here (like building a studio so we could keep our photography business going… ya know, little things like that). Now we devote all of our tinkering time, money and energy to the firehouse and we need camping (and owning a trailer) to be as easy as possible. So we knew that eventually we’d want to change to a modern trailer.

The deal on the R-pod was so good and our current trailer is pristine, therefore worth the most amount of money right now. So we’re making the switch. Function beat form and we’re selling the rebuilt Trailblazer.

019traileroverhaul

It’s a little bittersweet, but it feels like the right time to do it. So if you know anyone in the market, feel free to share this Craigslist post.

In the meantime we’re hoping Das Boot will finally allow Aaron’s foot to heal so he can put the finishing touches on the workshop (I think I’m literally only waiting for a counter top to be screwed down before taking “after” pics) and keep forging ahead on the living room/dining room redo.

The controversial fire hose lights

One of my favorite moments on our House Hunters episode is when we see the fire hose lights. Our realtor, Ted, comments on how cool they are. We awkwardly look at each other while trying to think of something to say that won’t offend him… because we hate the fire hose lights. Instantly and forever.

001fire_hose_lights

Don’t worry if you love them, as Ted does, you’re in the majority. I would say 90% of people love them… maybe even 95% because I assume some people who like them might hold their tongue after we explain our distaste.

They’re just too kitschy for us. “Oooh – you’re in a firehouse and you have fire hose lights.” Blech! I’ll give the guy who installed them a pass because he IS an actual fire fighter. We’re not.

002fire_hose_lights

They were destined to come down since day one, and with the downstairs renovation ramping up, it was time to see how exactly these lights were constructed. All we knew for sure was that each pair of yellow hoses had a bulb of some sort and the white hose housed an HVAC line.

003fire_hose_lights 004fire_hose_lights

We suspected that the lights were part of a track lighting system. The lights were clearly suspended from something and that’s the only way we could envision safely hanging them. We’ve actually had several people email us offering to buy these lights when we take them out. Each time I’ve explained that we really don’t know if there would be anything to sell once we dug in. We were right about that… but oh so wrong about the construction…

005fire_hose_lights

A few weekends ago, I helpfully offered to start taking down the patchwork of drywall that makes up the ceiling in the cube. Then, not so “helpfully,” I couldn’t reach the ceiling while standing on the ladder that fit in the cube. Aaron obliged my curiosity and agreed to take down a panel.

006fire_hose_lights

That led to another and another before he exclaimed, “This is so much worse than I thought!”

007fire_hose_lights

Pulling the ceiling revealed a curious network of cords… that looked a lot like extension cords… Odd…

008fire_hose_lights

Closer inspection revealed that they were in fact extension cords that led to two power strips that were plugged into an outlet.

009fire_hose_lights

010fire_hose_lights 011fire_hose_lights

I understand that not everyone who reads this blog has an in-depth understanding of electrical, but those who do will surely realize the clusterfuck that we uncovered. This is at least six different kinds of wrong. It’s NEVER OK to put a LIVE ELECTRICAL OUTLET behind drywall. Never. Period. This is why electrical codes exist! Because shit like this can cause a fire or get someone injured or killed.

The rest of the lights are made with an under cabinet puck taped to an extension cord. In other words, just as unsafe as the rest of this mess.

We were so flabbergasted by all of this that all we could do was laugh… and be thankful that we never turned those lights on anyways. Oh, and, hey we scored two new power strips!

So the definitive answer to anyone who had hopes of buying the lights is “Sorry, we can’t be responsible for possibly burning your house down.”

Things are looking up

That’s a really silly title. Can you get rusty at blogging? Because I might be. Suddenly a month has gone by! We’ve been working on SO many different things, but haven’t had anything to show for it yet. It’s not our normal MO, but when some necessary parts for the basement workshop had to be reordered, we decided to dive into the the first floor reno, which I detailed our plans for oh so long ago.

Although 2015, felt like a bit of a lost year in terms of visible progress on the firehouse, we kicked off this renovation with some key features routing electric for the basement sub panel, adding windows, and finding and installing our fireplace.

We’re back at it and into some of the really boring/incredibly tedious/worth it in the end, projects that will get the room ready for paint. First up: patching the dining room ceiling. Hence the title of the post. Although, really, Aaron is the one who has been looking up. Get it? Ha! … Sorry.

001diningroomceiling

This is definitely one of those projects that we waffled on. Was it worth it? Would it make a difference? Could we just paint over the rough spots to make them blend in? That is what we opted to do in the studio.

But the dining room felt different to us. While we love the industrial look, we worried in this space it would just feel unfinished. Also we have so many things going into the space that we want you to notice. It would be a shame if the ceiling detracted from that.

002diningroomceiling 003diningroomceiling 004diningroomceiling 005diningroomceiling

The ceiling in the living room was previously repaired (and painted black) which also made us lead towards making the change. (That ceiling and the duct will be painted white when the time comes.)

006diningroomceiling

So we decided it was worth the time to fix the ceiling… even though that means in the end you WON’T notice the work. The project itself was more labor and time intensive than expected, because isn’t everything in a renovation? Aaron started by scraping off the loose bits of plaster and patching the numerous holes. Then he carefully layered on 150 pounds of mud.

The result was so worth it! (Says the person who did none of the work.)

007diningroomceiling 008diningroomceiling 009diningroomceiling 010diningroomceiling 011diningroomceiling 012diningroomceiling

It’s nice to have a clean slate in here. We’re working on a few DIY light fixtures that will give some much needed light to this space.

013diningroomceiling

As I mentioned, we’re ping ponging between projects a bit. Lately, we’ve been sourcing wood slabs for the dining room table, and Aaron is in the basement this week installing the dust collection system. Updates should get more frequent as we start crossing things off the list for both spaces!

Checking in

It’s been a bit of an unintended absence the last few weeks and I apologize. It felt like we literally spent the last few days of the 2015 hanging onto a thread and hoping the universe wouldn’t notice and send some other tragedy our way. It worked and 2016 has really turned the corner! So I thought I would check in, chat a bit, show you pictures of our dogs. It’s basically like my Instagram account, but with more words.

The flood waters have receded

Like the rest of St Louis, we faced an unprecedented amount of water falling from the sky in the warm weather of late December. Our basement nearly flooded. Truthfully we were only saved by the drainage system, which Aaron was able to divert most of the leaks into. Our sump pump ran constantly. I spent a sleepless night worrying about the basement literally filling up with water. At the peak of the crisis, water started shooting in OVER Aaron’s head. It was like the firehouse was suddenly built in the middle of a pond.

Fixing

But it precipitated (see what I did there) a welcome change. The massive amounts of water and a call from one of our neighbors (we’re not sure who, we tried to to call the sewer department and couldn’t get through) brought out a crew to pump the storm drain. That gave us a chance to tell them about the entire truck of concrete that was emptied into a now nonexistent manhole in preparation for tearing down the building by the substation. That prompted a massive project to fix the line and now the water is gone. It’s like it never happened. Barring an act of God (or another misplaced load of concrete) we think our basement is finally once again safe… and now has added protection thanks to the drainage system.

The workshop is happening

FOR REAL. I’m a broken record when it comes to this space, but things are getting real down there. The lockers are in place and full of supplies. The dining room is being freed of construction paraphernalia. And if it weren’t for an incorrect order of pvc pipe joints (it was marked incorrectly on Home Depot’s side) we would be JUST about done with that space. You’ll get a real update soon!

I got a Roomba!

Aaron surprised me (despite our “no gifts this Christmas”) with a Roomba he scored on an awesome Amazon deal. It is AHHHHHmazing! I feel so fancy, like a have a cleaning lady… even though she’s really only good at floor maintenance.

Roomba

Hank is huge!

Hank is still growing, but we think he’s reached his max height. The situation behind the couch went from this…

IMG_2520

To this:

IMG_1595

So that is what’s new with us. Things will get back to their regularly scheduled programming around here very soon. We’ve got our sights set on the dining room/living room and can’t wait to get going!